Sylic
Softener Flakes for Textiles – Manufacturer & Supplier
1.Why Choose Softener Flakes Instead of Silicone Emulsion?
Softener flakes are one of the most widely used textile finishing agents. Compared with silicone softener emulsions, they are more stable, cost-effective, and easier to handle in large-scale production.
Better stability – No demulsification problems like silicone emulsions.
Consistent performance – Provide long-lasting softness and smoothness.
Economic advantage – Concentrated flakes require lower dosage, reducing production costs.
Easy to apply – Simple dissolution in warm water and direct use in finishing baths.
For textile mills, softener flakes are the most reliable choice to achieve soft, smooth, and flexible hand feel.
2.Applications of Softener Flakes
Our textile softener flakes are suitable for a wide range of fabrics and finishing processes:
Fabric Finishing: For cotton, polyester, blends, towels, bed linens, and garments.
Denim Treatment: Widely used in denim finishing to give jeans a soft, comfortable, and premium hand feel.
3.Product Categories – Choose the Right Softener for Your Needs
We supply different types of softener flakes and related softening agents:
Cationic Softener Flakes
| Items | Basic Character | Suitable Fabrics | Application | Suitable Scenarios & Characteristics |
|
Softener Flake Sylic F3601 |
Light yellow flake
PH (5-10% aqueous solution):4.0-6.0 Cationic |
Suitable for softening treatment of knitted, woven, polyester/cotton fabrics and lubricating yarns |
Dilution temperature: 60-70 ℃ Padding method: 2-3 g/L, temperature 30 to 40 ℃. One immersion and one rolling or two immersions and two rolling. Dipping Process: 0.3-0.8% (o.w.f), bath ratio 1:10-15, temperature of 40-50 ℃, 15 to 30 min. |
Washing process Handfeel:Soft,Silkly |
|
Softener Flake Sylic F3621 |
Light yellow flake
PH (5-10% aqueous solution) :3.5-5.5 Cationic |
Suitable for soft finishing of various fibers such as cotton and linen, as well as their blended fabrics and yarns |
Dilution temperature: 60-70 ℃ Recommend dosage:(Calculated based on 10% paste) Wet spinning method: 10 - 30 g/L. Temperature: 30 - 40℃. One immersion and one rolling or two immersions and two rolling. Dipping Process:2.0 - 5.0% (o.w.f), Temperature: 40 - 50℃,Bath ratio: 1:10 - 15, 20 - 30 minutes. |
Yarn process/ Dyeing factory process
Low viscosity, low foaming Resistant to salt and alkali Handfeel:Soft and smooth |
Weak Cationic Softener Flakes
| Items | Basic Character | Suitable Fabrics | Application | Suitable Scenarios & Characteristics |
|
Softener Flake Sylic F3600 |
Light yellow flake PH (5-10% aqueous solution):4.0-6.0 Weak Cationic |
Suitable for kintted,woven and polyester-cotton fabric |
Dilution temperature: 60-70 ℃ Padding Process: 2-3g/L, 30-40 ℃, double dip and double rolling or one dip and one rolling. Dipping Process:0.3-0.8% (o.w.f), bath ratio 1:10-15, temperature 40-50 ℃, 15-30min. |
Washing, Yarn and Dyeing factory process
General Flake Handfeel:Soft and smooth |
|
Softener Flake Sylic F3603 |
Milky white flake PH (5-10%solution) :3.0-4.0 Weak Cationic |
Suitable for cotton and linen, chemical fiber, denim, knitted fabric and washed cloth |
Dilution temperature: 50-60℃ Dipping Process: Sylic F3603 10% dilution liquid Dosage: 3～10% (o.w.f) Temperature: 40～50℃ Bath ratio: 1:10～15 Time:30 minutes |
Denim washing process
Handfeel: Soft, smooth and better than Sylic F3614Economical Flake |
|
Softener Flake Sylic F3607 |
Light yellow flake PH (5-10% aqueous solution) :3.0-5.0 Weak Cationic |
Suitable for Cotton, chemical fiber and blended |
Dilution temperature: 70-80 ℃ Padding Process: 2-3g/L, temperature 30-40℃, two immersion and two rolling or one immersion and one rolling; Dipping Process:0.3-0.8% (o.w.f), bath ratio 1:10-15, Temperature 40-50℃Time:30 minutes. |
All kinds of processing in dyeing factory
Low foaming, low viscosity Low yellowing coefficient Resistant to salt and alkali |
|
Softener Flake Sylic F3611A |
Light yellow flake PH (10% aqueous solution): 3.0-5.0 Weak Cationic |
Suitable for all kinds of cotton and blended fiber fabrics or the washing process of garments |
Dilution temperature: 60-70 ℃ Dipping Process: 0.3-0.8% (o.w.f), bath ratio 1:10-15, temperature 40-50℃, Time:15-30mins.Padding Process: 2-3g/L, temperature 30-40℃, two dipping two rolling or one dipping one rolling |
Washing process/Dyeing factory process
Low yellowing, low viscosity, low foam;Resistant to salt and alkali; Handfeel: Fluffy and super soft |
|
Softener Flake Sylic F3614 |
Light yellow flake PH (5-10% aqueous solution): 4.0-6.0 Weak Cationic |
suitable for soft finishing of denim, wool sweaters, towels fabric |
Dilution temperature: 50-60℃ Immersion and rolling method:10-30g/L; The temperature is 30 to 40℃, with one immersion and one rolling or two immersions and two rolls Dipping Process:2.0-5.0%(o.w.f), temperature 40-50℃, bath ratio: 1:10-15, 20-30 minutes |
Denim washing process
Handfeel: Soft and fluffy,and better than Sylic F3603 in cotton knitwear Economical Flake |
Nonionic Softener Flakes
| Items | Basic Character | Suitable Fabrics | Application | Suitable Scenarios & Characteristics |
|
Softener Flake Sylic F3602 |
Cream white flake PH (10% aqueous solution): 3.0-5.0 Weak Cationic |
Suitable for cotton and blends fabric |
Dilution temperature: 65-70 ℃ Dipping Process: 10% flake Sylic F3602 5-10 %( o.w.f) bath ratio 1:10-15, temperature 40-50℃, 15-30 minutes. Padding Process: 10% flake Sylic F3602 20~60 g/L, padding working liquid at 30-40℃(Rolling over rate 70-90%), drying. |
Yarn process/Dyeing factory process Excellent hydrophilicityWeak cationic, nonionic character, Can be used with anionics |
|
Softener Flake Sylic F3604 |
White to yellowish sheet PH (8-10% aqueous solution):6.0-8.0 Nonionic |
Suitable for cotton and blends fabric | Dilution temperature: 70-80℃ Immersion and padding :2-3g/L, temperature 30-40℃, two immersion and two padding or one immersion and one padding;Dipping method: 0.3-0.8 %( o.w.f) bath ratio 1:10-15, temperature 40-50℃, 15-30 minutes. |
Yarn process/Dyeing factory process
Almost no yellowingLow viscosityResistant to salt/alkaliGood hydrophilicityUsed for bleaching & fabric softening |
|
Softener Flake Sylic F3605 |
White to ting yellow flake PH (5-10% aqueous solution) : 4.0-5.0 Nonionic |
Suitable for cotton,linen,rayon and thier blends | Dilution temperature: 70-80 ℃ Diluted to 10% concentrationDipping Process: 3-8 %( o.w.f), bath ratio 1:10-15, temperature 40-50℃, 15-30 minutes.Padding Process: 20~50g/L, padding working liquid at 30-40℃(Rolling over rate 70-90%), drying. |
Yarn process/Dyeing factory process No effect on fabric whiteness or shadeSuitable for various fabrics. Handfeel:Soft, bulky |
| Softener Flake Sylic F3606 |
Pale yellow flakes PH (10% aqueous solution) : 4.0-6.0 Weak Cationic |
Suitable for cotton and blends fabric | Dilution temperature: 65-75 ℃ Padding process: 30-50g/L, padding working liquid at 30-40℃(Rolling over rate 70-90%), drying.Dipping process:Sylic F3606 (10%),3-8% (o. w. f), bath ratio 1:10-15 for 15-30 minutes at 20-30℃,Dehydration and drying. |
Yarn process/Dyeing factory process Excellent hydrophilicityWeak cationic, nonionic character, Can be used with anionics mainly used for bleaching, light color and have strictly request for colored yarn, fabric softening |
| Softener Flake Sylic F3610 |
White to yellowish sheet PH (8-10% aqueous solution):6.0-8.0 Nonionic |
Suitable for cotton and blends fabric | Dilution temperature: 70-80℃ Padding method: 2-3g/L, temperature 30-40℃, two immersion and two padding or one immersion and one padding;Dipping method: 0.3-0.8% (o.w.f), bath ratio 1:10-15, temperature 40-50℃, 15-30 minutes. | Yarn process/Dyeing factory process Almost no yellowing; Low viscosity; Resistant to salt/alkali; Good hydrophilicity; Used for bleaching & fabric softening. |
| Softener Flake Sylic D3620 |
Pale yellow flake PH (5-10% aqueous solution): 4.0-6.0 Weak Cationic |
Suitable for softening treatment of yarns and fabrics with strict color requirements for bleaching. | Dilution temperature: 70-80℃ Padding method:Dosage: 10-30g/L. Temperature:30-40℃. One immersing and one padding or two immersing and two padding Immersing method: Dosage:2.0-5.0%(o.w.f).Temperature:40-50℃.Bath ratio:1:10-15.Time:20-30min |
Yarn process/Dyeing factory process
Excellent hydrophilicityResistant to salt and alkaliNo yellowing Handfeel: Soft and smooth |
Soft beads
| Items | Basic Character | Suitable Fabrics | Application | Suitable Scenarios & Characteristics |
|
Soft Beads Sylic F3622 |
Light yellow semi-bead PH (10% aqueous solution):2.0-5.0 Weak cationic |
Suitable for various cellulose fibers and their blended fabrics |
Dilution temperature: 70-80℃ Dipping method:2.0-20.0% o.w.f (based on 5% diluent) Padding process: 20.0-200.0g/L (based on 5% diluent). |
Yarn process/Dyeing factory process Good stability in salt and alkaliHigh whiteness,good resistance to phenolic yellowingDoes not contain AEEA fatty acid condensates Handfeel: Soft and smooth |
|
Soft Beads Sylic F3623 |
Light yellow semi-bead PH (10% aqueous solution):2.0-4.0 Cationic |
Suitable for the softening treatment of pure cotton and its blended fabrics. |
Dilution temperature: 70-80℃
Based on 10% diluent Dipping Process: 2.0-10.0% by weight Padding Process: 20.0-100.0 g/L |
Yarn process/Dyeing factory process High whiteness, low yellowing; Good resistance to phenolic yellowing Handfeel :Soft, fluffy and thick |
|
Soft Beads Sylic F3624 |
Milky white to light yellow semi-bead PH (10% aqueous solution) :3.0-6.0 Weak cationic |
Suitable for the softening treatment of various cellulose fabrics and their blended fabrics. |
Dilution temperature: 70-80℃
Based on 10% diluentDipping Process: 2.0-10.0% o.w.f Padding process: 10.0-100.0 g/L |
Yarn process/Dyeing factory process
Low yellowing Easy to dissolve Handfeel:Soft and fluffy |
Soft Oils
| Items | Basic Character | Suitable Fabrics | Application | Suitable Scenarios & Characteristics |
|
Soft Oils Sylic F3643 |
Yellowish viscous liquid Solid content (%) :90±1 PH (1% concentration) :2.0-4.0 Cationic |
Suitable for yarns and demin fabrics |
Impregnation method : 0.3 to 0.8% of the fabric weightI mmersion and rolling method : 2 to 10 grams per liter |
Yarn process/Washing process Good compatibility of amphoteric ions Excellent for denim volumizing finishingLow yellowing Handfeel:Soft and fluffy |
|
Soft Oils Sylic F3649 |
Light yellow paste PH (1% concentration) :3.0-5.0 Solid content (%) :90±1 Cationic |
Suitable for all kinds of fabrics | Dilution temperature: 50℃ Impregnation method:Dosage of dilute solution: 2-6% (o.w.f) Process: 40℃*20minBath ratio: 10 ~ 20:1 Drying: 110℃Dipping method:Dosage of dilute solution: 20 ~ 60g/lProcess: one dip and one rolling (room temperature), Drying:110℃ |
Yarn process/Washing process Silicon-free,Anti-static Low yellowing Handfeel:Soft and smooth |
As a leading softener flakes manufacturer and supplier, we can provide customized solutions for your textile production.
Our Factory
Skychem Group entered the textile dye industry in 1999 and established the first brand company – Hangzhou Tiankun Chemical Co., LTD. Since 2009, Skychem Group has explored the global market. At the same time, in order to meet the needs of customers in more application areas, we began to produce and supply textile auxiliaries, silicone,bio-enzymes and waterproof agent chemical new materials, pharmaceutical and other products
Our Certificate
Our products meet international standards and are compliant with OEKO-TEX® and other environmental regulations.
Formaldehyde-free
Low yellowing performance
Eco-friendly & sustainable
Packaging Options
Our softener flakes are packed securely to ensure safety during transportation and storage.
Standard packaging: 25kg woven bags
Custom packaging available upon request.
Contact Us Today
Looking for a trusted softener flakes supplier or manufacturer?
We offer samples, technical support, bulk supply, and OEM/ODM services.
Get in touch now for the best softener flakes wholesale price and customized solutions.
QUICK SEARCH
Contact Us
Contact Skychem Group for more chemical solutions, If you have questions or need more information, please contact us.
We will respond within 24 hours
Technical Service
Whatsapp & Telephone:
+86-15267084488
E-mail:
Info@skychemi.com
Fax:
+86-571-86750661
Address:
5th Floor, Southeast Technology R & D Center,Xiaoshan District, Hangzhou, China
