Technical index

Appearance	Light yellow to yellow solid
PH Value/	4.0-6.0
Solid content	96-100%
Ionicity	Non-ionic

 

Characteristics

• Chemical composition:                                                 Water-dispersible polyesterAppearance:                                                                   light yellow to yellow solid

  Ionicity:                                                                                      Non-ionic

  PH value:                                                                                  5.0±1.0

  Solid content:                                                                            98±2%

  Solubility:                                                                       90℃ hot water dilution

  Packing:                                                                    25Kg/kraft paper lined woven bag

  Storage stability:                            The storage period is 1 year (temperature≤30℃, humidity＜50%)

  Environmental protection/toxicity:                                according to OeKo-Tex 100

  Safety:        Not irritating to the skin. If the diluted liquid gets on the skin and splashes into the eyes, wash it off with water immediately.

Scope of Application

• Easy decontamination finishing agent	Dipping method: dosage (1～4)% o.w.f, dipping at 50℃ (30～60) minutes
  Hydrophilic finishing agent	Padding method: mixing solution [Sylic FU5400(8～15)% compounding (10～50)g/l] → Two dip and two rolling (rolling residual rate 65%～75%)→drying (100～130)℃ → stereotypes (170～190) ℃
  Non-ionic antistatic agent
  Moisture wicking finishing agent
  Anti-wrinkle agent in bath	Amount of dyeing in the same bath: General formula (1～4)% (o.w.f) Formula of special easy-to-scratch fabric Sylic FU5400(5～10)%+Polyacrylamide(0.5～3)%
  Hydrophilic levelling agent	Determine the dosage according to customer requirements
  Raising agent	Example: Hydrophilic softener can be directly diluted to (8～20)% content, if the hand feels Very high requirements, it is recommended to use Sylic FU5400(5～10)% + Sylic F3540(1～3)%

Instructions 

Suggested prescription: Dilute 5-15%.

Process: water→stirring 80r/min→heat to (90~95)℃→slow cast Sylic FU5400→swell→75~80℃ thermal insulation (60~90) minutes

Bell→cool to 40℃→filter and discharge.

Packaging and storage

The product is sensitive to low or high temperatures and cannot be stored at temperatures < 0 ° C or > 40 ° C, otherwise it may cause irreversible qualitative changes.