Polyaluminium Chloride(roller) Sylic FU5535 for wastewater treatment

Technical index

Appearance	Yellow granules
Aluminum Al2O3 content(%)	28% min
pH (1% aqueous solution)	3.5-5.0

Characteristics

1.It can quickly form flocs, with large flocs and fast sedimentation speed.

2.The suitable pH range is wide (5-9), and the pH value and alkalinity of the treated water decrease little.

3.It can adapt to various source waters of different temperatures, with good solubility. Especially when the water temperature is low, it can still maintain a stable sedimentation effect.

4.The liquid product is suitable for automatic dosing. The alkalinity is higher than that of other aluminum salts and iron salts, and has less erosion effect on equipment. It is easy to operate and does not clog pipes even after long-term use.

Scope of Application

It is widely used in water purification, wastewater treatment, precision casting, papermaking, and daily chemical products.

Instructions 

1.Dissolve with water and then add. The dilution ratio is generally: 2% – 20% (o.w.f).

2.The dosage of the reagent is usually: 1 – 15g/T. The exact dosage is determined by the user based on the stirring test and the pilot production test.

3.This product cannot be stored together with other chemical substances.

Packaging and storage

25kg pp woven bag with inner LDPE liner, sealed and protected from light, shelf life 12 months at room temperature.