Low-foam soap detergent Sylic D2713(F572)/Textile dyeing auxiliaries

Technical index

Characteristics

1.It has excellent dispersion performance for cationic dyes.

2.It is used for soaping and washing of acrylic and its blended fabrics after dyeing. It can fully remove cationic dyes adhering to the surface of cotton/wool fabrics, thereby improving various color fastness and has a small impact on color light.

3.It is used for soaping and washing after printing on acrylic and its blended fabrics, effectively preventing the dye on the fabric surface from staining the white ground.

4.It has a strong anti-sedimentation and dispersion ability, which can prevent dyes of different ionic types from coagulating and precipitating in the same bath.

5.It can be used as a dispersant for various dyes, especially suitable for reactive, direct and disperse dyes of the emerald blue color series, effectively preventing the formation of color spots and color patches.

6.Effectively remove the cationic fixing agent used for reactive dyes, which is conducive to repair.

Scope of Application

This product is used for soaping and washing of acrylic and its blended fabrics such as cotton/acrylic and wool/acrylic after dyeing. It can effectively remove the unfixed color of cationic dyes and prevent them from re-staining the fabric. It has a good dispersing, solubilizing and leveling effect on various dyes. At the same time, it has a very good effect on removing cationic type fixation agents.

Instructions 

A.For the washing after dyeing and printing of acrylic fibers and their blended fabrics:

D2713  1.0 – 3.0 g/L

Bath ratio: 1:10 – 15, 60 – 75℃*10 – 20 minutes, rinse with clean water and dry.

B.For the dispersant and leveling agent of dyes:

D2713   0.3 – 1.0 g/L (or 10% – 20% of the dye amount is used together)

C.For the removal of cationic fixing agents:

D2713  2.0 – 4.0 g/L

Bath ratio: 1:10 – 15, 85 – 95℃ * 20 – 45 minutes, rinse with clean water and dry.

D.For one-bath dyeing of blended fabrics such as wool/acrylic, polyester/acrylic

D2713  1.0 – 3.0 g/L

Addition procedure:

acetic acid → (sodium acetate) → tricalcium phosphate → cationic dye →F572,run for 10 minutes, then add acid or disperse dyes, follow the conventional process.

Packaging and storage

Protect the product from frost, heat and direct sunlight. Store in the original container at room temperature.

If stored properly, the shelf life is 12 months. The packaging available is 25 kilograms per package.